Industrial Property Due Diligence Checklist: What to Confirm Before You Sign

Dinesh Rana
Chief Operating Officer | Published: 16 Nov 2026 | Updated: 16 Nov 2026 | 6 Min Read
You’ve found a shed that looks right. The location works, the rent fits your budget, and the owner is ready to close. So you sign, move the machinery in, and then discover that the sanctioned power load can’t run your production line. Getting it enhanced takes months, and in the meantime you’re paying rent on a space you can only half use.
We’ve seen versions of this play out more often than we’d like, and it isn’t only sheds. A warehouse turns out to be a tight squeeze for container trucks. A plot of industrial land sits in a low patch that holds water every monsoon. A built-to-suit (BTS) facility is handed over with a lower clear height than everyone discussed, because that number never made it into the agreement.
The good news is that almost all of these can be caught before you sign. Industrial property due diligence means confirming three things before you commit: that the property is clean on paper, that the site holds up, and that it will actually work for your operation. This industrial property due diligence checklist is how we suggest approaching it, whether you’re looking at an industrial shed, a warehouse, industrial land or a BTS project.
Key Takeaways
- Check paper first. A good building can’t fix a bad title.
- Walk the site with your own trucks, machinery and stock in mind.
- Confirm sanctioned power before you sign, not after.
- For built-to-suit, write every specification into the agreement.
- Settle dues, loans and lease terms in writing upfront.
Paper: Is the Property Clean on Record?
It makes sense to start here, because a problem on paper can’t be fixed by a good building. For industrial land and BTS projects, this layer deserves the most attention, since you’re committing to the ground itself.
Confirm ownership and title
You’ll want a clear chain of ownership and confidence that the person you’re dealing with has the right to sell or lease. A title search by your own advocate is the starting point. We do a preliminary review before a property reaches your shortlist, which helps narrow things down early.
Confirm the land is approved for industrial use
For privately held land, check that the NA order for industrial use is already in place rather than “in process.” Inside GIDC estates, the allotment and transfer terms matter just as much, so it’s worth reading them before you get attached to a plot.
Confirm the building matches its approvals
With sheds and warehouses, what’s standing on site should match the approved plan and the building use (BU) permission. Extensions and mezzanines added later are the usual place where gaps appear. Where it applies, confirm the fire NOC too.
Confirm there are no pending dues or loans
Old property tax, electricity bills, water charges or estate maintenance dues have a way of following the property. The same goes for any loan secured against it. An encumbrance search at the sub-registrar’s office, along with a search on CERSAI, the central registry of security interests, will show any registered loan or charge. A quick check now saves an awkward conversation later.
Site: Does the Ground and the Structure Hold Up?
Once the paperwork is in order, walk the site with your own operation in mind. What you look for depends on what you’re taking on.
Industrial land: access, drainage and utilities
Start with the approach road. Is it wide enough for the vehicles your business will run every day? Then ask about the monsoon. Neighbours and local brokers usually know which plots stay dry and which don’t, and it’s worth asking even if the site looks fine in October. Finally, check how far power and water lines are from the plot boundary, because bringing them in can add real cost and time.
Industrial sheds: height, floor and crane
Eave height, floor load capacity, column spacing and crane provision decide whether your machinery fits comfortably or needs workarounds. Take a look at the roof as well. A leak you spot during a site visit is far cheaper than one you discover over your stock.
Warehouses: trucks, docks and racking
For a warehouse, the questions shift toward movement. Can a 40-foot container truck turn in and back up without trouble? Are the dock levels right for your vehicles? Is the floor flat and strong enough for the racking you plan, and does the clear height let you use the space you’re paying for? Fire safety systems belong on this list too.
Fit: Will It Work for Your Operation?
A property can be clean on record and sound on site and still be the wrong one for you. This is the layer where most of the costly surprises we mentioned earlier tend to sit.
Confirm the power load
Compare the sanctioned load with what your machinery will actually draw, and leave room to grow. If an enhancement is needed, find out how long it will realistically take and what it will cost before you sign, not after.
Confirm your industry is permitted
Not every zone or estate allows every category of industry. It’s a simple question to ask early, and it can save you from a property that was never going to work.
Look at the site’s consent history
Your own pollution consents will always be yours to obtain. That said, a shed that has already housed a similar operation with its consents in order is usually a smoother starting point than one that hasn’t.
Think about logistics and labour
Distance to the highway, travel time to the port and the availability of workers nearby all shape your daily running cost. They’re easy to overlook when the building itself looks right.
Industrial Property Due Diligence for Built-to-Suit Projects
BTS gives you a facility designed around your needs, but it also asks for a little extra care, because you’re agreeing to something that doesn’t exist yet.
The land under a BTS project deserves the same title check you’d run if you were buying the plot outright. After that, the agreement becomes your most important document.
Dimensions, floor load, clear height, power and finishes should all be written down in detail, not left to a shared understanding. It also helps to be clear about who is responsible for approvals, what the construction timeline is, and what happens if handover runs late. Finally, confirm exactly when the lease begins, since that’s when rent and escalation start.
Lease Terms Worth Confirming
If you’re leasing rather than buying, a few commercial terms are worth settling upfront. In the leases we handle, owners usually look for a minimum lock-in of around three years, and rent typically escalates by about 5% each year. Beyond that, be clear on the security deposit, who handles maintenance and repairs, and how either side can exit if circumstances change. None of this is complicated, but having it in writing keeps the relationship easy.
Industrial Property Due Diligence Checklist at a Glance
Use this table as a quick reference before you sign. Not every check applies to every property, so the last column shows where each one matters most.
Check | What to confirm | Applies to |
Title and ownership | Clear ownership chain, right to sell or lease | All properties |
Industrial use approval | NA order in place, or GIDC allotment and transfer terms | Land, BTS |
Building approvals | Matches approved plan and BU permission; fire NOC where applicable | Sheds, warehouses |
Dues and loans | Tax and utility dues cleared; encumbrance and CERSAI search | All properties |
Access and drainage | Road width, monsoon condition, distance to utilities | Land |
Structure | Eave height, floor load, column spacing, crane, roof | Sheds |
Truck movement | 40-foot truck turning, dock levels, floor flatness, clear height | Warehouses |
Power load | Sanctioned load against actual draw, enhancement timeline | All properties |
Permitted industry | Zone or estate allows your category | All properties |
Consent history | Similar operation previously run with consents in order | Sheds, warehouses |
BTS agreement | Specifications in writing, approvals, timeline, late handover, lease start | BTS |
Lease terms | Lock-in, escalation, deposit, repairs, exit | Leased properties |
How Divya Estate Management Helps
We’ve worked across Gujarat’s industrial corridors since 2000. At Divya Estate Management, these checks happen before a property reaches your shortlist, not after you’ve fallen for it. We do a preliminary title and approvals review, and for any purchase or long lease we recommend a full search by your own advocate.
When we put options in front of you, we match the specifications to what your operation needs and point out gaps upfront, whether that’s a power load that falls short or a clear height that limits your racking. Where possible, we shortlist sheds and warehouses with an existing consent history, so you’re starting from firmer ground.
With 250+ verified properties across Gujarat, we can usually show you a few options that clear all three layers. If you’re working through an industrial property due diligence checklist for a shed, a warehouse, industrial land or a built-to-suit project, tell us what your operation needs and we’ll take it from there.
Frequently Asked Questions
What is industrial property due diligence?
It is the process of confirming, before you sign, that an industrial property is clean on paper, sound on site and suited to your operation. It covers title and approvals, the land and structure, power, permitted use and the commercial terms.
What documents should I check before leasing or buying an industrial property?
Check the ownership chain and title, the NA order or GIDC allotment terms, the approved plan and BU permission, the fire NOC where applicable, receipts for property tax and utility dues, and an encumbrance search for any registered loans.
How do I check whether a property has a loan against it?
Run an encumbrance search at the sub-registrar’s office and a search on CERSAI, the central registry of security interests. If a loan shows up, ask the owner for the lender’s no-objection or closure letter before you proceed.
What should I check before taking a warehouse on lease?
Confirm that a 40-foot container truck can turn in and dock, that the dock levels suit your vehicles, and that the floor and clear height support your racking. Then check fire safety systems, sanctioned power and the lease terms on lock-in, escalation, deposit and exit.
How is due diligence different for a built-to-suit project?
The building doesn’t exist yet, so the agreement carries most of the weight. Run a title check on the land, then write every specification into the agreement, along with responsibility for approvals, the construction timeline, terms for late handover and the lease start date.
Does Divya Estate Management help with due diligence?
Yes. We do a preliminary title and approvals review before a property reaches your shortlist, match specifications to your operation and flag gaps upfront. For any purchase or long lease, we recommend a full search by your own advocate as well.
Checking a Property Before You Sign?
Tell us the property type, location, size and power requirement. We’ll come back with verified options that clear all three layers.
Author
Dinesh Rana
Oversees planning and operations across industrial and commercial real estate transactions at Divya Estate Management, working with manufacturers and logistics operators on site selection, lease negotiation and possession across Gujarat’s industrial belts.
Related Blogs
Industrial Property · Gujarat
Need Industrial Space in Gujarat?
Looking for a warehouse, shed, factory or industrial land or just want to talk through the options first? He is happy to help.